eVP-20

Electric propulsion system with eVector technology

Designed for applications for up to 20 pounds of thrust

The eVP-20 electric propulsion system consists of an eVector propulsor, an electronic speed controller (ESC),  high-performance folding propellers, and a uniform mount for connecting to the airframe.

Propulsor  EV-20

Lift profile 5 to 20 pounds
Maximum continuous current 15 amps/48 volts
Maximum continuous power 1920 watts
Kv rating 85, 135, 190
Horsepower 2.5
Diameter 87.122 mm (3.43in)
Mounting pattern 4-M5 on 50mm BC
Internal resistance 0.225, 0.085, 0.048 ohms
Input voltage 12s to 20s
Weight 516gm (1.14lb)

Propellers

30.5″x10
32.5″x10
34.5″x10
36.5″x10
38″x10

The electronic systems controller (ESC) is designed to uniquely optimize the performance of the eVP-20 electric propulsion system from CR Flight.

ESC  HV Pro 14s

Peak power rating 30Kw
Continuous current  240A
Continuous rating duration 180s
Burst current 360A
Burst rating duration 5s
Maximum voltage 60V
Maximum number of LiPo cells 14S
Minimum voltage 15V
Max ERPM 1,000,000
Resistance  .00018 ohms
Input resolution 12 bit (o.o2%)
Maximum operating temperature (50% current limit start point) 115C
Recommended airflow to achieve maximum power ratings 10m/s
Decoupling capacitor Not included
Weight (no cables) 155g
Dimensions 96x52x22mm
Input signal PWM frequency up to 500Hz
Input PWM Frequency Pulse Width 1000μs to 2000μs (Adjustable)

Motor de-sync protection Yes
Auto motor PWM-freq Yes
Regenerative braking Yes
Max regen current 30A (10% max set current)
Max regen voltage 110% power on voltage
Auto timing advance Yes
Stall protection Yes
Configurator tool Yes
Data logging (black box) Yes
Bi-directional control Yes
Micro USB firmware flashing Yes
RPM output Yes
Modes

  • Normal mode: Incremental + Linear power ramp control
  • Multi-rotor:  Instantaneous Input = Output Step Response
  • Heli: Soft-start for drive-train protection
  • Traction:  Same as normal except for active torque control, which applies a motor phase current limit that ramps proportionally with higher motor duty-cycles
  • Reverse:  Normal mode with reverse capabilities

Multi-rotor capabilities

  • Auto-detect ProShot or Dshot any frequency range
  • ProShot1000 capable (1Mbs/s)
  • Dshot300 to Dshot1200 capable (0.31-1.2 Mbs/s)

The eVector advantage

Greater performance through contra-rotation

Get eVP-20 performance data

Give us your email address and we’ll send you a link.

  • This field is for validation purposes and should be left unchanged.

Let's talk about how you can gain the eVector advantage